Long Range Hybrid Scope Rings

Diameter

30mm | 34mm

LONG RANGE HYBRID SCOPE RINGS

The Hawkins Precision Long Range Hybrid Scope rings are a lightweight, direct mount, 25 MOA solution for your long range, ultra light hunting rifle. They are CNC machined out of a single piece of 6061 aluminum and weigh between 3 oz and 4 oz for the set. The rings come standard with a center mounted anti-cant level cap, and can be ordered without a level cap if needed. They are action length and action specific and are currently available for multiple manufacturers including: Remington 700 (6-48 and 8-40 screws), Defiance, Stiller, Lone Peak, Impact Precision, Kelbly, Kauger Arms, Tikka, Pure Precision, and more. See below for action compatibility.

Long Range Hybrid Action Compatibility

Remington 700 Pattern

Rings come with #6 and #8 screws. Will fit these rifles and actions:

  • Remington 700
  • Bergara
  • Christensen Arms
  • Fierce Rival
  • MOA Rifles Actions
  • HS Precision Actions
  • Nosler M48
  • Springfield Waypoint 2020

Stiller/Lone Peak Pattern

Will Fit These Actions:

  • Stiller TAC and Predator Actions
  • Lone Peak Razor/Razor Ti
  • Kelbly Atlas/Atlas Lite
  • Zermatt Ti3 / Origin / SR3 / TL3
  • Impact Precision Round Actions
  • Pierce Engineering Steel and Titanium
  • Pure Precision SKLTN, Summit and Summit Ti
  • Kauger Arms VPR SST
  • Weatherby 307
  • Mack Bros EVO SS
  • Tuebor Legion/Legion Ti
  • BAT Machine Igniter

Defiance Pattern

Will Fit These Actions:

  • Defiance
  • AllTerra C2
  • Mac Bros EVO II and Element
  • Falkor LW7

Tikka Pattern

Will Fit These Rifles and Actions:

  • Tikka T3
  • Tikka T3X

Installation Instructions

scope ring

Long Range Hybrid Rings feature directional arrows engraved on the bottom of the rings. The arrows are mounted pointing toward the end of the barrel. The scope rings are also marked with an F for the front ring and R for the rear ring. Minimum scope tube mounting lengths are as follows: Remington 700 - 5.00" SA / 5.50" LA - Stiller/Savage - 5.10" SA / 5.50" LA.

scope ring

Sheer/recoil pins are included in the hardware kit. Torque the ring bases to your action to 15 in-lbs for #6 screws. 22 in-lbs for #8 screws. Torque ring caps to 25 in-lbs or to your scope manufacturer’s recommended torque setting.

Scope Ring Height

The below information is only a general guideline for scope ring height and long range hybrid scope ring selection. It is always best to measure your optic/rifle system for proper scope ring selection. Be sure to also measure your scope main tube length to make sure your scope is long enough for direct mount scope rings.

Height
Height from the bottom of the Scope to the top of the action
Application
Low
0.5" (30mm) / 0.55" (34mm)
Sporter Barrel Contours with 50mm Scope Objectives -
Carbon Barrels with a 44mm objective or less
High
0.6" (30mm) / 0.65" (34mm)
Sporter Barrels with 56mm Scope Objectives -
Carbon Barrels with a 50mm Scope Objectives or less